Argon POD 2.8" Capacitive Touch Display Module _MAKE_AUDIO_SPEAK 2023 - we've updated this

2023 - we've updated this E-Ink breakout with a EYESPI connector to make cabling easier with an 18-pin FPC

This version 5V-10W is for cars with both 12V & 24V batteries

We have a 5V/2A supply that should be able to drive 1 meter (depending on use) and a 5V/10A supply that can drive up to 4 meters (depending on use) You must use a 5V DC power supply to power these strips

1x 27k resistor (colour bands: red/violet/black/red/brown)

Argon POD 2.8" Capacitive Touch Display Module _MAKE_AUDIO_SPEAK 2023 - we've updated thisThe Argon POD 2. 8" Display module is designed to be used with the modular Argon POD case for the Raspberry Pi Zero (sold separately). It adds a 2. 8" capacitive touch display, 4 user programmable buttons and an IR receiver to your POD system! Important Notes You need two other items to use this module: Argon POD Case Argon USB HDMI Module Your Pi Zero will require GPIO pins to use the POD display You will need to install scripts to enable the POD